Chuck Components

	Part #	Description
	305313	Seal Kit With Brass Gland
	308606	Cylinder End Cap O-Ring
	500-10-1076	Offset Block
	500-10-1077	Holding Block
	500-10-1158	.62-11 - Spring Plunger
	500-10-1274	Roller Cam Stud - 1.75 Inch
	500-10-587	Nail Drive Pin Holder
	500-10-588	Cylinder Rod End Adapter
	500-10-589	.25X1.25X3.5 - Shim
	500-10-620	Nose Holder - LH
	500-10-621	Nose Holder - RH
	500-10-622	Track Nose - LH
	500-10-623	Track Nose - RH
	500-10-625	Middle Hinge Plate
	500-10-647	Nail Track Pivot Plate - LH
	500-10-648	Nail Track Pivot Plate - RH
	500-10-653	Shoulder Bolt - .31X.38
	500-20-1038	Head Plunger Assembly
	500-20-1039	Head Plunger Assembly
	950-30-124	Flange Bearing - 3/8X1/2
	950-30-148	Flange Bearing - 1/2X3/4
	950-30-363	2 Piece Clamp Collar - 1-1/8
	950-30-855	Core Drive Pin - .31X12.5
	950-50-052	Double Action Cylinder - 1-1/2X6
	950-50-058	Seal Kit - 1-1/2X6
	950-50-1097	Adapter O-Ring/JIC - 8-8
	950-50-115	Piston Ring Kit - 1-1/2X6
	950-50-1379	Double Action Cylinder - 1-1/2X6
	950-50-141	Adapter Male JIC/NPT - 8-6
	950-70-200	Socket Head Cap Screw - 1/4-20X1/2
	950-70-202	Socket Head Cap Screw - 1/4-20X3/4
	950-70-226	Socket Head Cap Screw - 1/4-28X5/8
	950-70-280	Socket Head Cap Screw - 3/8-16X1-1/4
	950-70-887	High Collar Lock Washer - 1/4